• Max Pressure: 3000PSI
• Inlet: 1/4” QC Plug
• Max Flow Rate: 11L/min

Black Soap Nozzle (H2500-B)

• Soap-Detergent nozzles eliminate wasted time by applying cleaning solutions to your project instantly with ease. Used for low pressure spraying. This nozzle will allow a soft spray soaking of the surface with a liquid soap or detergent. The soap nozzle has a larger orifice than spray nozzles which not only allows room for soap mixed with water but also reduces the PSI when your pressure washer is operating under low PSI its able to draw cleaning solutions from the chemical container. Its is important to use the soap nozzle when applying soap/cleaning solutions. You can NOT use a regular spray nozzle when applying soap/cleaning solutions.

Green Flushing Nozzle (H2500-G)

• Outlet: 03/25º Flushing Nozzle
• With a narrower spray pattern than the 40° nozzle & with a more concentrated spray pressure, this nozzle is best suited for flushing dirt, mud & grim. (H2500-G)

Red Blasting Nozzle (H2500-R)

• Outlet: 03/0º Blasting Nozzle
• This nozzle delivers a very concentrated stream of water. Care should be used to avoid gouging wood or damaging fragile surfaces. The spray should be directed at a 45 degree angle to the surface & used like a scraper to remove paint, grease & dirt.

White Washing Nozzle (H2500-W)

• Outlet: 03/40º Wash Nozzle
• The wide spray pattern disperses water over a large area & is recommended for rinsing & moderate washing.

Yellow Chiselling Nozzle (H2500-Y)

• Outlet: 03/15º Chiselling Nozzle
• With a narrower spray pattern than the 40° nozzle & with a more concentrated spray pressure, this nozzle is best suited for flushing dirt, mud & grim.